0086-519-87905108

News

Home / News / Operating condition control: the key to moisture management in feed drying equipment

Operating condition control: the key to moisture management in feed drying equipment

Posted by Admin

In the feed processing industry, feed dryer equipment plays a vital role. It can not only effectively reduce the moisture content in the feed and extend the shelf life of the feed, but also improve the overall quality of the feed, ensuring its safety and palatability. However, to achieve this goal, fine control of operating conditions is particularly important. This article will explore in depth the setting and adjustment of key parameters in the drying process, as well as the subsequent treatment of the dried feed, in order to achieve the ideal feed moisture content standard.

Accurate setting and adjustment of drying parameters
Drying temperature
Drying temperature is a key factor affecting the efficiency of feed drying and the effect of moisture removal. Too high a temperature may destroy the nutrients in the feed and affect the quality of the feed; while too low a temperature will lead to low drying efficiency and prolonged drying time. Therefore, when setting the drying temperature, it is necessary to comprehensively consider the type of feed, the initial moisture content, and the desired final moisture content. In actual operation, the drying temperature can be monitored and adjusted in real time through the temperature control system to ensure that it fluctuates within the optimal range.

Drying time
The length of the drying time is directly related to the degree of moisture removal in the feed. Too short a drying time may not be able to fully remove the moisture in the feed, resulting in too high a moisture content in the feed; while too long a drying time may increase energy consumption and even have an adverse effect on the quality of the feed. Therefore, it is crucial to set the drying time reasonably. This usually requires comprehensive consideration of factors such as the performance of the drying equipment, the type of feed and the initial moisture content, and verification and optimization through actual tests.

Air volume
The air volume is also an important factor affecting the drying effect of the feed. The appropriate amount of air volume helps to speed up the evaporation rate of moisture on the surface of the feed and improve the drying efficiency; but too much air volume may take away the heat and fine particles in the feed, affecting the drying effect and feed quality. Therefore, when setting the air volume, it is necessary to comprehensively consider factors such as the structure of the drying equipment, the physical properties of the feed and the drying requirements to ensure that the air volume is moderate and evenly distributed.

Subsequent treatment of dried feed
The dried feed also needs a series of subsequent treatments to further reduce the moisture content and improve the quality of the feed. These treatment measures mainly include cooling and screening.

Cooling
The temperature of the dried feed is usually high. If it is not cooled in time, it may cause thermal denaturation or agglomeration inside the feed, affecting the quality of the feed. Therefore, cooling equipment is needed to quickly cool the dried feed. Through cooling treatment, not only can the temperature of the feed be reduced, but also the moisture in the feed can be more evenly distributed, which is conducive to subsequent processing and storage.

Screening
Screening is an important link to remove debris, impurities and incompletely dried feed particles generated during the drying process. Through screening treatment, the purity and uniformity of the feed can be ensured and the overall quality of the feed can be improved. At the same time, the feed can be graded as needed during the screening process to meet the feeding needs of different animals or different growth stages.

When using feed drying equipment, precise control of operating conditions is crucial to the final moisture content standard. By reasonably setting and adjusting parameters such as drying temperature, drying time and air volume, combined with subsequent treatment measures such as cooling and screening, effective control and management of feed moisture can be achieved. This not only helps to improve the quality and safety of feed, but also reduces production costs and energy consumption, and contributes to the sustainable development of the feed processing industry.

contact us

GET FREE APPOINTMENT